Construction Safety RegulationsConstruction Safety Regulations

0 Comments

Prevent construction hazards with these safety rules. 

Construction Safety Regulations 

To avoid injuries, accidents, and other health problems on construction constructions, here are some general construction safety rules to follow to keep workers and visitors safe: 

1. Always wear PPE 

All workers and visitors to the construction should wear the required PPE to reduce various hazards on the job construction. Common PPE includes goggles, helmet, gloves, earplugs or hat, boots, and high visibility clothing and hood.

2. Be careful and follow the signs 

Safety signs allow management to warn and educate employees and visitors about health and safety. Place them well around the construction if necessary. Workers should be aware of safety tips and signs at construction constructions: restriction signs, work signs, warning signs, safety condition signs and fire weapon signs.

3. Give clear instructions 

A construction policy or user guide must be available on the construction. This will familiarize new users with the construction’s functionality. Quick chats are also an effective way to communicate health and safety instructions to employees. It is done before work begins, every day or so.

4. Keep the construction clean 

Make sure debris, dust, loose nails, and standing water from excavation and backfilling aren’t just lying around the construction. The construction should be cleaned daily and kept clean to prevent crime and travel.

5. Organize and store tools properly 

Make sure there are no devices lying around and leave the power on and the device unplugged. Following construction rules will help prevent equipment damage or even injury to workers. Organizing them in the right place will also make it easier to navigate.

6. Use the right equipment for the right job 

Accidents often occur due to improper use of tools or equipment. Avoid using artificial tools. Instead, use the right tools to get the job done quickly and safely.

7. Have an emergency response plan 

An emergency response plan tells employees what to do in the event of an emergency such as a natural disaster, fire, hazardous material spill or other type of event. Have a dedicated team for handling emergencies, answering questions and reporting potential hazards, quality issues or missing items. 

8. Enter the storage area 

One of the ways to protect the construction is to maintain built-in controls such as barriers, fences and buffers. These will help isolate people from dangerous areas with high electrical currents or chemicals with toxic fumes.

9. Do an initial check on tools and equipment 

Before starting work, make sure that the tools and equipment to be used are free of defects or damage.

10. Report a problem immediately 

Train users to report defects and near-misses on the construction as soon as they see them. Problems can only be solved when reported to management. The earlier the problem is reported, the more likely it is to cause an accident or other damage.

Introduction to Building ConstructionIntroduction to Building Construction

0 Comments

People need different types of structures: buildings, bungalows and apartments; hospitals and health centers for health; school; colleges and universities for education; banks, shops, offices, buildings and factories to work; train stations, bus stations and airports for transportation; clubs, theaters and cinemas for entertainment; and temples, mosques, churches, dharamshalas, etc. for worship. These building activities are an important indicator of the country’s social progress.

The original bamboo building & school building can be considered as the first village construction made to meet the needs of the building. Before that, the caves were his first home. India still has many modern temples with halls and halls with beautiful paintings. The Egyptians built great pyramids. The Greeks developed a variety of building materials; These limits are known as architectural rules. The Romans designed a staircase for the interior and exterior of the building. They use pozzolana, sand, mortar, plaster and concrete. During the period of Gothic architecture (1100-1500 AD), churches were built with pointed arches and ribs to support the building blocks. The ribs of the openings are supported by stone columns and reinforced with footings. These structures led to the idea of molded structures.

The period from 1750 AD is known as the period of modern architecture. Construction materials like columns, beams, chajjas, canopies, RCC slabs are popular because of the speed of construction. The most important elements in the design of the building for all purposes are: 

  • Weather and its effects, 
  • People and what they want 
  • Materials and construction methods, and 
  • By-laws and regulation. 

Tents, shamianas and tap shelters are not considered buildings.

The classification of the building 

According to the National Building Code, buildings are classified, according to their location, as follows: 

1. Residential buildings

These are buildings where accommodation is provided for ordinary residential purposes, with or without a kitchen or dining room or both, excluding any listed C building.

  • Lodges
  • Single or two family dwellings 
  • Dorms
  • Apartment
  • Hotels

This is any building or any building under the same management that sleeps, or cannot eat, more than 15 people who are transient. 

2. Educational Buildings

This includes any building used for school, college or day care for more than 8 hours per week including construction for teaching, learning or entertainment that is not covered by assembly buildings. 

3. Industrial companies

Which is used for medical or other treatment or care of persons suffering from physical or mental illness, disease or infirmity; Care of an infant, child or elderly in prison or correctional facility is prohibited for inmates. 

  • Hospital & Sanitary 
  • Holding company 
  • Penal institution

Examples are jails, prisons, mental hospitals, mental asylums, rehabilitation, etc.

4. Assembly buildings 

When a group of people gather for fun, entertainment, society, religion, patriotism, community, travel and the like, for example. Theaters, theaters, halls, convention halls, galleries, museums, skating rinks, ice rinks, gymnasiums, restaurants, study halls, dance halls, restaurants and drinking water, transport stations, public airports, land and sea, etc.

5. Business Commercial buildings 

These include any building or part of a building used for business (not covered by industrial buildings); for the maintenance of accounts and records and the like; physicians and dentists (unless covered by institutional buildings); service facilities such as new kiosks, lunch counters serving less than 100 people, butchers and washrooms.

Town halls, town halls, courts and libraries should be classified in this group to the extent that the main functions of these are public business transactions and the processing of books and records. 

6. Mercantile Buildings

These include any building or part of a building, which is used as a store, shop, market for the display and sale of products, wholesale or retail. Offices, ware buildings and factories that are suitable for selling products and that are in the same building should be included in this group.

7. Industrial buildings 

These include any building or part of a building or structure where products or materials are manufactured, assembled or processed. An example:  Assembly buildings, laboratories, dry cleaning plants, power plants, ports, smoke buildings, gasworks, refineries, dairies and sawmills.

8. Storage buildings

This includes any building or part of a building, normally used for the storage or storage (including the repair, treatment or maintenance and storage) of goods, merchandise or merchandise ( except for those involving large fires or explosives), vehicles or animals. For example, laboratories, cold stores, warebuildings, garages, warebuildings, roads and ports, garages, hangers (other than – aircraft maintenance), grain elevators, barns and toilets. 

9. Hazardous Buildings 

This includes in particular any building or part of a building used for the storage, handling, manufacture or treatment of explosives or explosives or products that can easily burn and/or is to create a toxic vapor or explosion. , for security, management, control. Production or treatment involving corrosive, poisonous or harmful alkalis, acids or other flammable liquids, dusts and explosions, toxic gasses, irritants irritating or corrosive, and for the storage, handling or processing of any material that produces explosive mixtures of dust. or causing the material to split into small fine particles that ignite suddenly.

Software For Construction ManagementSoftware For Construction Management

0 Comments

Construction managers must handle many details, from scheduling meetings to determining change orders and managing budgets. To help manage large teams and multiple projects without delay, construction managers should consider using construction management software. 

Construction management software keeps important details and planned projects in one place, so every project can move forward on time and within budget. They also help teams and employees collaborate and communicate effectively. Before making a purchase, sit down with the purchasing team and decide exactly what you are looking for in a solution. What types of construction projects do you manage and which construction management software features will help your team work more efficiently? 

If you’re considering investing in construction management software, you’ll want a tool that offers these important features: 

1. Planning & Estimating

In many cases, planning tools are the first feature of general contractors looking for construction management software. This makes sense, considering that sticking to a budget is one of the most important success factors for a construction project. At the same time, you want to make money and stay profitable. Look for construction project management software that helps your construction managers estimate costs and validate them using benchmarking and integrated strategies. Gantt charts can also help you stay on budget with improved planning. Some tools can be integrated with construction ERP software or construction management software, to provide more accurate estimates based on your company’s capabilities and structure.

2. Sample Project Information

Most of the work in the construction industry is very complex, involves many people involved, involves hundreds of individual tasks, and takes a long time. Over time, the types of data and graphics related to the project accumulate. It is important to be able to tap into this ever-expanding database at any point in the project lifecycle and find the information you need. Some people may also refer to Project Information Modeling as “Data Management”. Look for construction management software features that help you share models and business information between operations, finance and management, with built-in analytics and reporting. You will also need a document management service to keep important reports and information in one place.

3. Cost management and accounting

Almost all construction management tools will offer budgeting and benchmarking functions. However, a more robust cost management system will include plans and forecasts to give you an overview of each project’s costs. When you can track and manage these details effectively, you reduce the risk of surprises. It’s also a must-have if your construction company handles in-house accounting. Excel spreadsheets are great for tracking budgets and costs, but it’s not always easy to access important data in the field or share new files with other decision makers.

Most project management software for the construction industry includes an accounting feature that lets you track budgets, costs, invoices, and invoices so you can see your finances at a glance, as well as projects. Document management makes it easy to access reports. Ideally, you will be able to choose different prediction methods depending on the type of object, using the performance criteria and goals stored in the same system.

4. Field control management

As these construction constructions begin to accumulate, it can be difficult for the construction supervisor to oversee the landscaping at each construction. Look for construction management software that provides local control and execution features to help the project manager create and define daily work plans, communicate with team members, assign tasks, update schedules, and capture work day results at the end. of any change. Some construction software can help your construction company stay compliant by managing inspection types and scheduling equipment, safety, and quality inspection procedures.

5. Actionable Data Analytics

Most construction management software will help you organize your project, track customer communications, and manage projects. But if you want good value for your money, find construction software that has document management features that will make it easy to review data to improve your process. Some tools offer reporting features that will give your insight into your inventory management and productivity. You can monitor resources and measure the benefits gained by analyzing processes against cost and schedule. It can help you increase productivity, improve efficiency and strategy, and improve system transparency. If you have a shortage of work (a serious problem for most construction projects), you can quickly spot it and take immediate action.

The best construction management software has the following features: 

While knowing what features you need from building management software is half the battle, finding tools that have those features isn’t always easy. To make your search easier, each of these construction management software solutions includes the features we’ve listed above.

  • BuilderTrend
  • CoConstruct
  • Penta Construction Management Software
  • Sage 300 Construction and Real Estate
  • CMiC
  • Zoho Projects
  • Contractors Software Group
  • Microsoft Project

Choosing construction project management software is difficult, especially when there are so many options on the market. Large companies and small companies have different needs, and not every construction management tool will work for both.